Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

Replacement cleats for the Speedplay X-1, X-2, or X-3 pedals. Note: these cleats are not compatible with Zero pedal systems.
$0.16
Pro Head Reinforcement System (PHR) has a larger and more spherical contact area and is designed to balance loads transferred to the rim. The PHR system acts as a ball and socket interface, allowing the spoke to pivot into alignment while maintaining even, consistent contact during installation in order to follow the perfect trajectory from the hub to the rim.
$0.25 - $1.00
The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples
$0.50
The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams
$0.99
Replacement lower hardware for Rockshox forks.
$1.00
DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately
$1.00 - $1.25
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately
$1.20
DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Straight pull spoke blanks - Nipples sold separately
$1.25 - $88.19
Champion 2.0 Black Spokes - One 264mm spoke = 7g
$1.80 - $7.35
Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually
$1.99
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.99
Shim set for fine-tuning the position of a Centerlock rotor on the hub. - Ideal for swapping wheelsets without needing to re-adjust the brake caliper - 0.2mm shim thickness - Set of 10 shims - Stainless steel construction
$1.99 - $11.99
Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.
$1.99
- Brake casing has internal lining and external plastic coating - Length: 30m
$1.99
- Routes cables underneath the bottom bracket - Will not rust or corrode
$2.00 - $3.08
This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - Compatible with straight pull hubs only - One 264mm spoke = 5.9g - Nipples sold separately
$2.00
Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.
$2.00
- 8x1mm Allen head - Bag of 10
$2.19
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
$2.39
- Aluminum w/lock nut - 18mm long/6mm O.D.
$2.39
- Replacement cable anchor bolt for brakes - Includes nut and washer
$2.39 - $2.99
- Sunlite Cottered Pins
$2.99
Bar end plugs (2)
$2.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$2.99 - $3.99
The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.
$2.99
- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating
$2.99
- Shell: 8mm flanged axle nut - Flanged
$2.99
- For MTB levers - 7mm x 1mm - Aluminum construction
$2.99
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
Page 1 of 60 Next page