Tools

The tool features an 8mm hex in the middle of it for those really stuck caps

Compatible with our Professional Chain Tool and the new Master Chain Tool

Everyone needs tire levers. Everyone needs good tire levers. Ours are great. They come as a set of two, shaped to interlock with each other for storage. They're made of glass fiber-reinforced plastic so they're super strong and durable. The broad tip makes it safer for use on carbon wheels, and the spoke hook makes it easy to use multiple levers for those really tight tires.

- For unscrewing and tightening of front chain ring nuts - The dimension of the hexagonal key opening is SW10 - Material: premium flex plus carbon steel

Material: premium chrome vanadium steel

The single sided cone wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

Unior, Freewheel removal tool, Removal Tool, Compatible with Shimano, SRAM, Sachs, Sun Race Use with ½” wrench

- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.

Measurement: from 0 to 0,6% - no chain wear. from 0,7 to 1,2% the chain is worn out and it is necessary to replace it.

The single sided headset wrench has a remarkable toughness, hardness, durability and tight fit. Material: premium flex plus carbon steel, surface finish: chrome plated according to ISO 1456:2009

- Blade chrome plated, black anodised tip - Handle – polypropylene

A handy tool to prevent spoke windup when working with bladed spokes Slots from 1.0mm-2.2mm for most spoke sizes

Used to remove and install Shimano® Hollowtech II, Campagnolo® Ultra-Torque and Power Torque, Race Face®, FSA®, SRAM®, Truvativ®, Chris King® bottom brackets as well as many and others. The 1609/2HOBBY wrench also fits on the external center lock disc nut.

The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.

The conically shaped tip of the tool is designed to slide between the pads inside the caliper and spread the pads by pushing pistons back into the caliper. Tool is bent 30° for easier access to the caliper

Used to remove and install cassette on hubs with 12 mm through axle.

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

- Pedal thread inserts are used to replace damaged threads in cranks

Use in conjunction with our Star Nut Setter to ensure the star nut is driven in straight. Compatible with 1" and 1 1/8" steerers.

- Surface finish: chrome plated according to ISO 1456:2009 - Unique design combines two tools in one: a standard disc brake pad spreader and rotor truing fork. - The slot allows you to true the rotor - The conically shaped tip of the tool is designed to slide between the pads inside the caliper and spread the pads, pushing pistons back into the caliper. - Material: premium flex plus carbon steel

Unior Fork Seal Driver

Unior, Cartridge BB tool 20 tooth, Bottom Bracket Tool, Cartridge For: Shimano®, ISIS® Material: premium flex plus carbon steel

A must have wheel building tool. Rotating handle and the guide shape enables you to quickly screw the nipple onto the spoke. It supports standard shape nipples.

A star-fangled nut needs to be pressed into a steerer tube to a specific depth and it needs to be driven in straight. This tool, especially when combined with our star nut setter guide, accomplishes both of those tasks easily. Thread the star nut onto the setter, place it over the end of the steerer, and using your favorite hammer, drive the star-fangled nut home. Compatible with 1" and 1-1/8" steerer tubes.

- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result

1751/2DT screwdriver is used for DT Swiss® SQUORX nipples with torx shaped top head. The 80mm long stem enables work with deep aero rims as well as with all the normal rims.

Used for servicing bicycle suspension Grab any kind of smooth and sensitive surface, like shock or fork sliders

- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6

- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link

Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.