Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$58.00
- Kit includes tape, 2 valves & 1 valve core wrench
$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)
$9.50
Wheels Manufacturing open bore adapters are used to press sealed cartridge bearings into place. The adapters are machined with one step to correspond to the bearing OD, which fits in to the center of the sealed bearing and an outside diameter to accommodate the bearing's outer diameter. Size: [Bearing inner diameter] x [Bearing outer diameter] Note: If only one dimension is given, that is the outer diameter of the adapter, with no inner diameter step
$6.99 - $13.99
Material: premium chrome vanadium steel
$9.99
For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.
$10.99
- Shimano, SRAM, Sun Tour, Chris King and Sun Race and others.
$11.99
- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible - 270mm of length for extra leverage - Small and light weight, perfect for toolbox and traveling
$11.99
- Blade chrome plated, black anodised tip - Handle – polypropylene
$12.99
The wrench is used for tightening and unscrewing screws with 2, 2.5, and 3mm hex-shaped nuts.
$12.99
- The wrench is used for tightening and unscrewing screws with 4, 5, and 6mm hex-shaped nut
$14.99
Three most popular TORX sizes: T10, T15 and T25mm
$22.99
- These 12" blades are compatible with the Unior hacksaw frame and come in a pack of 2 - Much safer for cutting carbon as it leads to fewer loose strands and leaves a cleaner result
$24.99
- Hex wrenches 1.5, 2, 2.5, 3, 4, 5, 6
$24.99
- Master link pliers are for commonly used chains with master link, SRAM Powerlink or the KMC Missing Link
$24.99
Spoke wrenches are designed to tighten nipples with flat diameter 3.3mm to 3.45mm.
$31.99
- The crank puller is designed to remove standard square spindle cranks. With help of the included adaptor other standards such as ISIS and Octalink cranks can also be removed.
$34.99
- The wrench is used to remove and install Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King bottom brackets - Small wrench is included for removal and installation of Shimano plastic bolts that are used on the Hollowtech II cranksets - Material: premium flex plus carbon steel, Surface finish: chrome plated according to ISO1456:2009
$38.99
- Quickly and accurately determine the wear and stretch of any chain
$38.99
Two 15 mm openings set at offset angles to easily remove pedals regardless of the pedal axle position
$44.99
- Pliers developed specially for cutting shift and break housing. Pliers cut precise and smooth without deformation to the cable housing and feature a build in crimping function for cable end caps. - In order to preserve the ultimate cutting performance, we highly advice not to use pliers for cutting shift/brake wires and spokes.
$46.99
- 3/32" chain whip
$49.99
- Hex wrenches 2, 2.5, 3, 4, 5, 6, 8 - TX wrenches 10, 25 - PH1 screwdriver - Chain tool - Schrader & Presta valve tool - Flat screwdriver 1.0 x 5.0 - Spoke Key 3.3, 3.45 and DT
$52.99
- The simple tightening of the spindle fits the chain pin with perfect precision and with its ergonomic design it is easy to use.
$129.99
- Foldable and precise tool, used for re-aligning rear derailleur hangers and maintaining precise gear shifting - Compatible with all wheel sizes from 20? to 29?+ and screws directly into rear derailleur hanger threads - Precise measuring gauge can be locked in place, so you don´t lose you measurement when you push it against the wheel in different positions
$8.50
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
$10.00
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
$20.00
- 5 DART plugs for use with the Stan's NoTubes DART tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$25.00
Modern carbon rims and tires create a real challenge for traditional tire levers, and the new wave of tubeless setups have taken the challenge to the next level. Tire fits are tighter than they've ever been, while carbon rims require non-metal levers to resist damage to the bead or brake surface during use. Previous solutions to this problem have involved using a metal core inside of a plastic lever however, this solution has its own challenges as the core of the lever is where you can add the least stiffness and strength. This leaves metal core levers both less stiff and heavier than they need to be. - Forged alloy blade - Reinforced nylon Rim Shield safe for use on carbon rims - Integrated spoke-hook wing - 105mm x 25mm x 7mm (Perfect for Seat Roll Premio or EOLO Wallet) - Weight (Two levers and neoprene sleeve)—36 grams
$45.00
The Italian Army Knife, a very SILCA take on the traditional multi-tool. We've addressed the things that frustrate us with conventional multi-tools, while keeping the layout that fits conveniently in the SILCA EOLO Wallet or Seat Roll Premio. The mid-length tool design is long enough to provide access to recessed fasteners, but short enough not to experience twist or damage under moderate torque as can happen on longer tools. All tools are forged rather than bent from hex stock. While this method of construction is more expensive, the value is unquestioned during a road-side repair. Mid-length tools also allow us to position the tools within the same plane, reducing the thickness of the overall package by half. Double-chromed tools and fully stainless steel hardware and bushings guarantee a long life without corrosion (the number 1 killer of multi-tools is corrosion). Forged aluminum sidebars contain rare-earth magnets for holding a spare chain connector. - Forged and machined sidebars with integrated chain-connector storage. - Tredici (Tre-dee-chee) 13 forged and plated tools: Hex 2/2.5/3/4/5/6/8 + Torx 10/20/25 + PH2/Flat + DiscPadSpreader. - 8mm adapter connects to the 5mm hex for optimal use of space. - Stainless steel pivot hardware - 98 grams
$65.00
A ratchet wrench is a great tool for speeding fastener installation/removal or for getting at bolts with limited rotational access. The SILCA T-Ratchet Kit is a compact ratchet wrench that can also be configured as a T-Handle or as a bit driver. The magnetic interfaces provide a quick and secure connection of the supplied assortment of S2 steel bits. The low-angle ratchet engagement makes the most of each rotation and can transfer loads far exceeding the torque spec of most fasteners. - Configurable cold-forged 1/4" bit driver ratchet with magnetic interfaces - Stainless Steel 1/4" Extension - Includes S2 steel bits: 2, 2.5, 3, 4, 5, 6mm Hex T10, T20, T25 Torx PH2 Philips - Waxed Canvas tri-fold carrier with reflective cross-stitch quilting and magnetic closures that double as keepers for steel hardware when opened.
$85.00
Few tools are used as frequently and can cause as much heartache or wasted time as the seemingly simple Hex and Torx keys. It's one of the first things you notice at the top levels of motorsport tools, or in the toolboxes of Pro-Tour mechanics: extremely high-quality tools. The reasoning is simple, better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from titanium or aluminum. - High-strength S2 steel tools - Precise tool interface dimensions - Polymer coating for superior grip - Laser-etched size indication - Compact tool holder - Hex Wrenches: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm - Torx Wrenches: T7, T8, T9, T10, T15, T20, T25, T27, T30 - PLEASE NOTE: The T7 tool features a 100-degree bend rather than a 90-degree for improved control and access to very small fasteners
$99.99
One of the first things you notice in the toolboxes of top-level motorsport or Pro-Tour mechanics is extremely high-quality hex keys. The reasoning is simple; better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from titanium or aluminum. For the HX-ONE, we use the finest S2 tool steel; shock-resistant steel which has been refined by toolmakers for the optimal balance of strength, hardness, shock resistance, and dimensional control. The keys are then coated with thin-dense chrome and a high-grip, high-visibility textured polymer finish for maximum grip and control. Included with the HX-One Home Essential Kit is the proprietary SILCA 17-4 Stainless Magnetic Adapter. The adapter turns the 6mm hex key into a 1/4" bit driver. - Fully CNC-machined beechwood box with magnetic closure - S2 steel hex keys: 2, 2.5, 3, 4, 5, 6, 8 and 10mm - Red polymer coating for superior grip on hex keys - Custom S2 stainless steel bit adaptor: 6mm to standard 1/4" bit - S2 steel Torx bits: T8, T10, T15, T20, T25, and T30 - S2 steel Screw bits: PH1, PH2, SL4, and SL5
$125.00
Roughly 70% of damage to high-end carbon components like seat posts, handlebars, and stems happen when making adjustments without using torque measurement. This problem is accentuated by the majority of adjustments occurring on the roadside or trail-side. T-Ratchet + Ti-Torque solves these problems by delivering a highly ergonomic tool with a torque measuring extender that provides real-time feedback as you are tightening the fastener. The Ti-Torque beam has three separate scales on it, 2-6, 3-5, and 4-8, which allow you to easily see when you've reached your desired torque setting. Ti-Torque weighs in at a mere 30 grams meaning you'll hardly notice it's there until you need it. The T-Ratchet uses interchangeable magnetic components to convert from a screwdriver to a ratchet, to a ratcheting T-Handle in seconds, which gives the user the ability to have several tools at once in an extremely small package. - Ti-Torque beam with three separate scales for measuring 2-8Nm - Precision ratchet with convertible magnetic extension - Steel bit extender - S2 steel Hex bits: 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm - S2 steel Torx bits: T10, T20, T25 - S2 steel 2mm Phillips head bit - Duck-waxed canvas carrying case measuring 120mm x 70mm x 30mm - Kit weight: 220 grams
$5.00
Shimano Wiring Plug Tool for use with Di2 - Tool is required to assist Di2 shifter plug installation - Shimano TL-EW02 tool for connecting and disconnecting the Di2 wiring harness and shifter plugs - For use with Dura-Ace 9070, Ultegra 6870/6770 and Alfine Di2 components and E-Tube wiring
$19.00
Shimano Genuine disc brake bleed Funnel unit for ST type Road brake lever (M7 thread bleed port) Features: - Oil spill guard lid with an integrated oil stopper holder - Funnel base - Bleeding instructions available for download under 'Documents & Links' below
$6.00
The new B-gap adjustment tool is simple and easy to use, allowing for a quick set up experience. Small enough to be able to pack in your ride bag or stash in your toolbox for repeated use, it is also industrially recyclable if you find you no longer have use for it. This is the most precise tool for setting up and adjusting your drivetrain.
$32.99
- Easy to use tool for checking cassette wear
$5.00
Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post
$6.00
RockShox, 00.6815.066.020, Reverb post bleed tool
$9.00
• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch
$11.00 - $21.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$18.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$20.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - 30 Gold and Silver (2018+)
$20.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) -Judy Gold and Silver (2018+)
$20.00
200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon RL/TK A1 (2018+)
$36.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
$36.00
REAR SHOCK SERVICE KIT - FULL SERVICE MONARCH 3 RT3 (2013)
$37.00
Factory service kits for Reba A7 forks
$40.00
RockShox, 11.4115.129.010, Service Kit, Monarch Plus (does not include air can seals)
$49.00
200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Charger 2 RLC Sealhead) - Sid RLC A1+ (2017-2019)/Ultimate B4 (2020)
$49.00
50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)
$53.00
200 HOUR/1 YEAR SERVICE KIT (INCLUDES AIR CAN SEALS, PISTON SEAL, GLIDE RINGS, IFP SEALS, SEAL GREASE/OIL) - SUPER DELUXE THRUSHAFT C1 - TREK (2021)
$55.00
Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.
$55.00
- RockShox, 11.4118.038.000, Service kit, Monarch B1RL C1 R, RT, RT32014+
$65.00
- 200 Hour/1 Year Service Kit for Deluxe/Deluxe Remote A1-B2 (2017-2020)/Deluxe Nude B1+ (2019+) - Includes Air Can Seals, Piston seal, Glide Rings, IFP Seals, Remote Spares
$70.00
- Pike Dual Position Air A1 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Page 1 of 3 Next page