- Kit includes tape, 2 valves & 1 valve core wrench
$32.95 - $32.99
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links
$8.99 - $12.99
Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. - Hard gripping zones for high working speeds, while soft zones ensure high torque transfer - Partially Lasertip: the tip literally bites into the head of the screw and thereby prevents any slipping out of the screw head - "Take-it-easy" Tool Finder: color coding according to profile and size. - The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace - Includes practical rack for tidy storage of the screwdrivers - Screwdriver for slotted and cross-recess screws, Phillips - Multi-component Kraftform handle for fast and ergonomic screwdriving
An instant bicycle suspension performance booster. WPL ForkBoost lubricates and cleans bicycle suspension seals to eliminate stiction, remove dirt, and lengthen lifetime of the seal. Apply ForkBoost externally to the dust seals of bike suspension by coating the stanchion, pumping the suspension, and wiping away extracted dirt. ForkBoost is fully compatible with rubber and rubber derivatives, causing no risk of damage to the seals, seal swelling or cracking. Use ForkBoost internally during fork rebuilds, to soak foam seals and cut grease to specified thickness - Premium bio-based formula made with natural ingredients - Biodegradable, non-toxic, PTFE-Free formula - Cleans and lubricants bike suspension seals - Removes unwanted dirt and contaminants from suspension seals - Apply externally to dust seals to lengthen seal lifetime
$7.58 - $21.99
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
- For all TRP and Tektro hydraulic braking systems - Non-corrosive mineral oil - Increased Boiling point to 270 degrees C - Decreased viscosity for better fluid flow
Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
SILCA Gear Wipes are two-sided, disposable towels designed to remove dirt, grease oils, and sweat from your cycling gear. Each wipe contains a textured scrubbing side for removal of heavy dirt or grime and a soft polishing side for finish cleaning which leaves behind a spotless shine. The wipes use cosmetic-grade cleaning agents which are safe for use on hands and skin but contain no lotions or moisturizers which can leave behind streaks or slimy residues. SILCA gear wipes were initially developed by Brandon Hirokawa, the creator of the Hirobel frame clamp and pro-mechanic in cycling and triathlon. The wipes are originally formulated to clean dirt, grease, oil, sweat, and even drink mix residue from frames and components. However, it was quickly realized that the unique, fast-evaporating, non-solvent-based cleaning agent could make dirty white bar tape white again with no slimy residue, and also clean running shoes and dirty hands after a day in the workshop. This amazing cleaner has been mated with the top-end Kimberly Clark dual-surface substrate for maximum cleaning power. Each towel has a scrubbing side for heavy dirt and grease as well as a polishing side for delicate surfaces and finishes cleaning/polishing. Few practices can lead to improved longevity, smoother running, and increased efficiency of your equipment the way that cleaning it can. This is why ProTour mechanics clean every bicycle after every ride. They say that a clean bicycle is a happy bicycle, but do not let this hide the fact that a clean bicycle will run quiet, smooth, be more efficient, and will last longer than a dirty one.
One of the first things you notice in the toolboxes of top-level motorsport or Pro-Tour mechanics is extremely high-quality hex keys. The reasoning is simple; better tool fit leads to better feel and confidence for the mechanic as well as a significant reduction in the likelihood of damaging exotic fasteners made from titanium or aluminum. For the HX-ONE, we use the finest S2 tool steel; shock-resistant steel which has been refined by toolmakers for the optimal balance of strength, hardness, shock resistance, and dimensional control. The keys are then coated with thin-dense chrome and a high-grip, high-visibility textured polymer finish for maximum grip and control. Included with the HX-One Home Essential Kit is the proprietary SILCA 17-4 Stainless Magnetic Adapter. The adapter turns the 6mm hex key into a 1/4" bit driver. - Fully CNC-machined beechwood box with magnetic closure - S2 steel hex keys: 2, 2.5, 3, 4, 5, 6, 8 and 10mm - Red polymer coating for superior grip on hex keys - Custom S2 stainless steel bit adaptor: 6mm to standard 1/4" bit - S2 steel Torx bits: T8, T10, T15, T20, T25, and T30 - S2 steel Screw bits: PH1, PH2, SL4, and SL5
Hirobel is a specially designed clamp for bicycle repair stands that makes it easier to work on your bike. It better distributes stresses and loads through the bicycle frame, offering superior stability while eliminating possible crushing or damage to thin-walled and shaped tubing. The pressure clamps used on contemporary workstands were developed for round steel tubing more than 40 years ago, predating carbon fiber, aluminum, aerodynamic and oversized tube shapes, integrated seat masts, dropper posts, and suspension systems. These legacy designs assume your bicycle tubing to be both round and straight, and when it is not, the clamp can impart very high point loads at the clamp edges causing finish damage, internal carbon layup damage, or outright crushing of tubes on the lightest designs. With Hirobel, specially shaped, paint-friendly cones and bindings cradle the frame at the tube intersections, where wall thicknesses are higher and forces can be distributed over much larger surface areas. Adjustable and adaptable for any possible frame design, the Hirobel also allows the repair stand clamp to be located closer to the bicycle center of gravity. This improves stability and eliminates bouncing of the bike during heavier work while also locating the drivetrain consistently higher for the mechanic, improving visibility while reducing back strain.
The Italian Army Knife VENTI builds on the flat design, forged mid-length tools, and Stainless Steel hardware of our award-winning line of Italian Army Knives. Adding new tools including the most ergonomic and functional chain breaker ever featured in a portable multi-tool, the VENTI has everything you need. The unique magnetic slide-lock design of the VENTI chain-tool allows it to be more than twice as long as other designs for exceptional ergonomics in use, while also allowing it to be removed completely from the tool for improved functionality. The forged mid-length tools are long enough to reach all common cycling fasteners, but not so long that they twist or deform under load. The ergonomic side plates also hold a discreet magnetic storage feature for a spare master link and all tools are coated with SILCA's unique high-grip chrome plating which provides better torque transfer at the bolt interface. - Metal injection sidebars with knurled grip surface and stainless steel hardware - Forged chain breaker for 10-12 speed chain - Magnetic storage for 10-12 speed compatible chain connectors - Forged and plated tools: - Hex 2/2.5/3/4/5/6/8 - Torx 8/10/20/25 - PH2/SL4 - 7mm box wrench - 8mm flare nut wrench - 10mm open-end wrench - Disc pad spreader - Valve core remover - Spoke wrenches—13G / 15G - 172 grams
When we launched Secret Chain Lube, Josh admitted that the starting point for this product was a hot wax recipe he had used for years with pro teams that had won numerous world and Olympic medals. The idea behind Secret Chain Lube was to bring this technology to a lube that didn't require hot melting, but it turns out many of our customers were already big fans of hot waxing chains, and the requests flooded in for us to release the SILCA Secret Wax Blend...so here it is! Consisting of highly refined laboratory-grade paraffin and a high concentration of 3 specific sizes of nano-scale Tungsten disulfide, Secret Chain Blend not only acts as a lubricant but actually acts to modify the surface of the chain, filling in all of the crevices of the metal with highly lubricious and wear-resistant tungsten disulfide particles. As a result, chains waxed with Secret Chain Blend and Secret Chain Lube will actually get faster over time and after repeated waxings. Secret Chain Blend is the only hot wax lubricant to have a specifically matched and compatible drip wax that can be used to 'top off' the wax as needed, extending the duration between hot wax applications, and guaranteeing the quietest running drivetrain possible. Using the combination of Secret Chain Blend and Secret Chain Lube can dramatically extend the chain and drivetrain component life (up to 10x). - 500g / 17.6oz pouch - The chain should be VERY clean and dry before applying
$25.00 - $55.00
SILCA Super Secret Chain lube started out as a project to develop the fastest hot-melt wax lubricant available more than a year ago. Josh has been recommending Hot Melt Wax and helping Pro cyclists and triathletes wax chains for years and wanted to bring his lubricant formula to our customers, the challenge was how to consistently melt, dip and agitate the chain across different crockpot designs and temperatures. The project took a fascinating turn from the world of IndyCar when Josh was introduced to a group that had developed a technology to put micro-scale wax powders into a solution that was quick-drying and forms a coating that is indiscernible from hot melt dipping. The combination of air-drying liquid wax and Tungsten Disulfide would quickly prove to beat all currently available hot-melt waxes in friction testing while being much faster and easier to apply. Best of all perhaps is that this formula would prove to be very environmentally friendly, utilizing 4 different types of wax, nanoplatelets of WS2 (Tungsten Disulfide), and mild alcohol to act as a carrier. This same alcohol is used in the SILCA Gear Wipes, making them a perfect product to clean and remove Secret Chain Lube. - 4 oz. and 8 oz. bottles with the precision applicator tip for dripping on your chain, or 12oz lube (leaving room for your chain) for dipping the chain - The chain should be VERY clean and dry before applying - Apply according to video and let dry for AT LEAST 12 hours for optimal results, 24 hours if applied in cool or humid weather conditions! We recommend applying the lube AFTER your ride so it's ready for next time! - NOTE: Over time the WS2 will begin to settle to the bottom of the bottle, shake well before using!
Modern carbon rims and tires create a real challenge for traditional tire levers, and the new wave of tubeless setups have taken the challenge to the next level. Tire fits are tighter than they've ever been, while carbon rims require non-metal levers to resist damage to the bead or brake surface during use. Previous solutions to this problem have involved using a metal core inside of a plastic lever however, this solution has its own challenges as the core of the lever is where you can add the least stiffness and strength. This leaves metal core levers both less stiff and heavier than they need to be. - Forged alloy blade - Reinforced nylon Rim Shield safe for use on carbon rims - Integrated spoke-hook wing - 105mm x 25mm x 7mm (Perfect for Seat Roll Premio or EOLO Wallet) - Weight (Two levers and neoprene sleeve)—36 grams
The YPSILON (pronounced ip.si.lon) is SILCA's take on the unassuming Y-wrench. Most tools in this layout feature 4mm, 5mm, and 6mm keys; meaning that the wrenches for some of the most common use cases in cycling are readily available in one tool. The shape of the Y-wrench also offers superior control and stability over traditional hex keys, especially in tighter workspaces. Ypsilon was designed by a team of engineers and mechanics who obsess over improving products. The body of the tool is constructed using a composite polymer with soft over-mold grips. Unlike traditional Y-wrench designs, YPSILON is customizable and adaptable to the mechanic's preferences. This is accomplished by using a 1/4" bit collet with magnetic bit attachment in place of a fixed 6mm hex. This departure from the traditional Y-wrench design was inspired by the versatility of our T-Ratchet + Ti Torque kit. The YPSILON can easily transform into any required 1/4" based tool by swapping out the bit. - High-strength CrV steel spine leading to 4mm and 5mm hex - Lightweight composite polymer body with ergonomic grips - 1/4" bit collet with magnetic bit attachment
DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes
- Improved sealing and durability - New rotating metal hose fittings - High-volume hose with clamp - Longer lasting - Must-have for all mechanics - DOT 5.1 - NOT compatible with RockShox fork bleed kit
$10.00 - $20.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
• Essential mechanic tool to properly service and maintain all RockShox products • For RockShox Monarch
$16.99 - $17.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
This kit contains all the parts needed for scheduled maintenance and/or rebuild of A2 non-Stealth Reverb Seatposts. - Includes new, upgraded IFP - Requires RockShox Specialty Tools to perform Service: Oil Height Tool, IFP Height Tool
This is RockShox's recommended cleaner for suspension internals. Handy aerosol spray degreases and conditions small parts like O-rings and seals. - Formulated with special conditioners that will not cause O-rings and seals to dry, crack, or degrade - For use on all suspension products
$5.00 - $36.99
RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.
- Essential mechanic tools to properly service and maintain all RockShox products - Clamps the shock body for easy maintenance
Page 1 of 8 Next page