Safety

Timber 3.0 is a solid brass bell with a sleek black finish and a crisp, clean sound. If you find yourself using your bell on nearly every ride, then the Bolt-On model is the one for you. The Timber 3.0 Bolt-On is identical to the original model, except it features a tight, durable mount that won't spin, shake or rattle on your bars. Similar to a GPS or Garmin mount, the flexible nylon band tightens to your bars with a 5mm hex bolt. The band itself is 31.8mm diameter, the same as the wider part of your bars near the stem. It also includes a flexible 22.2mm shim for mounting your bell securely near your grips, closer to your hands (you'll want to use this setup for oversize and DH bars). - Installation is easy. There is no need to remove the grips, brakes, etc. Just flex the clamp open and slide onto your bar. - Upgraded version has a slimmer profile on your handlebars, smoother shifting between ring modes, and we've beefed up the strength of the internal clapper cable and the lever handle for longer life.

- Eady to install - Spoke mounted - 2 per set

• Front reflector (white) • Rear reflector (red) • Two wheel reflectors (white) w/spoke attachments

Retro Mirror Sprintech Single Mirror. Works with all road handlebars by attaching to the bar end using its simple retrobike install. Allows you to see traffic from behind without having to look over your shoulder. Expands your visual field without shifting head or body to see behind you. As reliable as a car's rearview mirror! Placed on the left side of the handlebars, the Sprintech rearview mirror is easy to install. Simply remove the cap from the end of the handlebar, insert the connector plug, and attach the Sprintech rearview mirror. Once installed, simply adjust to the desired position. Available in five colors: Black, White, Red, Yellow, and Blue. Also available in pairs!

Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.

Let 'em know you're coming...or announce your awesome arrival with a stylin', retro Nutcase bike bell. All you have to do is attach it to your handlebars and you're ready to ding-ding your way down the street.

Let 'em know you're coming with a retro Nutcase bike bell. Thumb lever provides a traditional ringer sound. - Mount Location: Handlebar

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

Made of solid brass, this bell’s melodic sound is full and old-fashioned. Big and brassy, the perfect accompaniment for cruisers, comfort, and town bikes. - Dome Diameter: 51mm (2") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

The LTD Mirrycle Mirror quickly attaches to Bontrager Isozone handlebars using the supplied wrench. It has a convex mirror for a wide field of view to help you clearly see approaching traffic. And the mirror easily adjusts to your optimum viewing angle.

This reflective yellow leg band with adjustable hook and loop closure secures loose pant legs to prevent chain catching. - Reliable hook and loop closure system works both wet and dry - Reflective yellow material for additional visibility - 1.25-inch width

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

• 65mm dome • Fits 21-26mm handlebars

• Adjustable quick-release strap • Ideal for MTB handlebars • Fits 20-32mm handlebars

The wheels on your bike spin, so why not your bell. Vintage-style spinner bell produces a great ring as it twirls around. • Top your bell with a cap from your favorite beverage. The Bottlecap Bell has a top that is shaped like a bottle so you can put your favorite cap on the top • Bottlecaps can easily be replaced when it is time for a new one • Fits standard bicycle handlebar • Includes attachment hardware

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

Let people know you're coming through. And do it in style. The perfect way to say 'Hello.' Or 'hey there,' 'coming through,' and 'sup. We've made ringing an art form, choose from our unique graphics and bold colors. Product details - Easy-to-push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

Give your bike the ol' razzle dazzle. The perfect accessory for fun and safety. Chose from three vibrant colors paired with reflective elements. - Fits the end of a standard grip (handlebar end cap needs to be removed) - Reflective elements for added safety

Twist to the left, twist to the right. Whichever direction, it's the perfect way to say 'Hello.' Twistabell provides a pleasant ringing sound all around town. Let people know you’re coming through—and do it in style. - Ambidextrous style is designed for both righties and lefties - Fits standard bicycle handlebar - Includes attachment hardware - Fits on handlebar with Bosch Purion display - Clamp: 22.2mm - Material: Stainless Steel

Twist to the left, twist to the right. Whichever direction, it's the perfect way to say 'Hello.' Twistabell provides a pleasant ringing sound all around town. Let people know you’re coming through—and do it in style. - Ambidextrous style is designed for both righties and lefties - Fits standard bicycle handlebar - Includes attachment hardware - Fits on handlebar with Bosch Purion display - Clamp: 22.2mm - Material: Stainless Steel

The perfect way to say 'Hello.' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Cheerful 'ding-dong' doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: 22.2mm - Material: Steel - Weight: 130g

The perfect way to say 'Hello' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through. And do it in style. - Cheerful 'ding-dong' doorbell style ring - Includes attachment hardware

The perfect way to say 'Hello.' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through—and do it in style. - Cheerful 'ding-dong' doorbell-style ring - Fits standard bicycle handlebar - Includes attachment hardware - Mounting Location: Handlebar - Clamp: 22.2mm - Material: Steel - Weight: 130g

Let people know you're coming through. And do it in style. Twist to the left, twist to the right Whichever direction, it's the perfect way to say 'hello'. This twister bell provides a pleasant ringing sound all around town. Product details: - Ambidextrous style is designed for both righties and lefties - Fits standard bicycle handlebar - Includes attachment hardware - Fits on handlebar with Bosch Purion display

Let people know you're coming through. And do it in style. Twist to the left, twist to the right Whichever direction, it's the perfect way to say 'hello'. This twister bell provides a pleasant ringing sound all around town. Product details: - Ambidextrous style is designed for both righties and lefties - Fits standard bicycle handlebar - Includes attachment hardware - Fits on handlebar with Bosch Purion display Specs: - Clamp: 22.2mm - Material: Stainless Steel

Twist to the left, twist to the right Whichever direction, it's the perfect way to say 'Hello.' The Twister Bell provides a pleasant ringing sound all around town. Let people know you’re coming through. And do it in style. - Ambidextrous style designed for both righties and lefties - Includes attachment hardware

Twist to the left, twist to the right. Whichever direction, it's the perfect way to say 'Hello.' Twistabell provides a pleasant ringing sound all around town. Let people know you’re coming through—and do it in style. - Ambidextrous style is designed for both righties and lefties - Fits standard bicycle handlebar - Includes attachment hardware - Fits on handlebar with Bosch Purion display - Clamp: 22.2mm - Material: Stainless Steel