Key features - Reflector mount for first and second generation Speed Concept seatposts - To use with a Bontrager Flare, use with the Bontrager Flare Horizontal Mounting Kit (sold separately)
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
$4.00 $8.00 50% Off
Giant's Numen Mini Taillight is small, powerful and surprisingly bright. It's so lightweight, you can just leave it on your bike where drivers will notice its 2 bright LEDs. This nice light has a flexible rubber mount so you can attach it almost anywhere on your bike. It has steady and flashing modes and runs up to 100 hours on its included batteries.
- Replacement taillight mount for Numen lights
Recon-E Light to Bosch motor unit connector cable.
A universal quick release mount that attaches to round-shaped drop and flat handlebars.
Keeping the light stable and centered on the handlebar, the stem mount allows for a clean, uncluttered handlebar.
Recon-E Light to Shimano motor unit connector cable.
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
$4.99 - $5.50
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
- Replacement aero mount for Numen light
- Quick Charge USB-to-Micro-USB cable to charge your rechargeable Bontrager lights - Also able to charge most other Micro USB systems - 9 inches/23cm long
Attaches Blackburn Local Lights to any rack.
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount rear light to the back of your Bontrager Circuit MIPS road bike helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
Key features: - Securely attaches all Ion lights to bars - Reduces vibration and slippage - Compatible with 22.2-31.8mm diameter bars - Mount rotates left and right for optimal placement
A light that's always there when you need it. - Three-LED headlight with four flash modes - Visibility range: up to 2,000ft or 600m - Batteries and stainless steel hardware included Specifications: - Battery: AAA (LR03) - Not rechargeable - Dimensions: 77 L x 34 W x 44 H (mm) - Waterproof rating: IPX3 - Weight: 150g
Product details - Easily integrate your Bontrager Flare tail light on your Madone 9 Series - Quick release designs matches perfectly on the Madone 9 proprietary seatpost clamp
Key features: - Replacement InnerGlo LED light strips for select Bontrager Town clothing - Compatible with Bontrager Town Stormshell Jacket, Town Stormshell Women's Jacket, and Town Stormshell Pants - Sold individually
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Road Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light in a perfect position to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Three bright LEDs with over 270 degrees of weather-resistant visibility. Send the right signal Added visibility. Flare 1 is powered by three ultra-bright LEDs that provide over 75 hours of run time on only two AAA batteries. Batteries included—when else does that ever happen? Product details - Be seen with Bontrager's focused optics and over 270-degree visibility - Three bright white, environmentally-friendly LEDs - Three modes—steady high beam, flashing and random flashing - 80+ hour run time - Includes AAA batteries and a seat post clamp
Giant's Numen Mini Lights are small, versatile, and bright. Both the headlight and taillight use super bright LEDs to make sure you're visible in low-light riding situations, and feature your choice of steady or flashing mode. The tool-free rubber mounting hardware is fast, easy to use, and fits nearly every handlebar and seatpost.
Giant's Numen TL1 5 LED Taillight boasts 5 bright LEDs so you get noticed out on the road. If that wasn't enough, you have 4 modes: steady, flashing, patrol, and random modes for high visibility in traffic. And it runs for up to 180 hours. This great water-resistant light also sports 2 mounting options.
$19.00 $38.00 50% Off
Giant's Numen+ Spark Headlight boasts 16 bright white LED lights that are sure to catch the attention of others on the road. It produces 80 lumens and features 5 different modes. A rubber strap makes it easy to mount and charging is just as simple, just plug it in with a micro-USB cable.
$19.00 $37.00 49% Off
Features: - 30 lumens (Numen+ Tag TL) ANSI standard approved - Runtime: Steady (5hrs), Low Steady (10hrs), Pulse (15hrs), Flash (30hrs), Random (50hrs) - Li-Po rechargeable battery - Power indicator - Auto start sensor - IPX4 Waterproof rating - Integrated USB plug - Flexible mounting system works with different shape handlebars and seatposts
Where your gaze goes, your light follows Add the safety of visibility to your helmet and light up the trail with help from the Bontrager Blaze helmet mount. Compatible with all Ion headlights. - Quickly mount front light and camera accessories on the front of your Bontrager Blaze WaveCel helmet - Tested with an accelerometer for intended breakaway point if involved in a crash
- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install
Page 1 of 3 Next page